Building DIY Platform Bed

Author: | Categories: Bed Design comments
DIY Platform Bed Storage

DIY platform bed – Building a platform frame for a full or double mattress can save hundreds of dollars compared to buying a frame. The low hanging, clean lines of a platform bed can add a modern touch to a bedroom. This platform works equally well for simple mattresses, spring beds and field combinations spring or mattresses futon.

instruction

Sand a face of all wood bands with sandpaper. This is the side that comes into contact with the mattress. Grinding all surfaces is optional DIY platform bed. Place three beams on their 2-inch edges, parallel to each other. The outer edges of the two outer beams should be 53 inches apart. In the center of the center beam should be 26 1/2 inches from the center of the two other beams.

Lay a wooden beam over the three beams, its ends at even height with the outer edges of the outside beams DIY platform bed. Attach it with a wooden screw per boom; drill through bands and in the center line of the beam below. Put the other strips, flush against first. Attach it with three wooden screws, similar to the first strip. Continue over and attach strips along the entire beam.

tips and warnings

Avoid trampling on the unsupported middle band, as they may not carry the weight of a grown adult on a foot. When the mattress is installed, it should distribute the pressure sufficient to support weight.

Best Post |  Information about Bunk Beds Ikea

Comments are closed.